Welcome to our websites!

Well-Designed 1 Inch Steel Ball - Grinding ball – Junda

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

Our intention is usually to satisfy our buyers by offering golden provider, great rate and good quality for Sandblasting Gun, Grinding Media Ball, Road Painting Machine Line Marking, We generally hold the philosophy of win-win, and build long-term cooperation partnership with clients from throughout the earth.We believe that our growth base on customer's achievements, credit history is our lifetime.
Well-Designed 1 Inch Steel Ball - Grinding ball – Junda Detail:

Producing process

After checking and testing the round alloy steel bar material,the production can be started according to the size of the steel ball . The steel forging is heated to a certain temperature by intermediating with frequency furnace to ensure the effective generation of variables in the forging;  The red-hot steel forging is sent into the air hammer and processed by skilled operators.  After forging the red hot steel ball immediately into JUNDA specially designed heat treatment equipment for quenching and tempering heat treatment, the high and uniform hardness value of the steel ball can be ensured.

Feature

1.High impact toughness

2.Compact organization

3.High wear resistance

4.Low breakage rate

5.Uniform hardness

6.No deformation

Packing And Transportation

Container Bag

Steel Drum

Net weight 1000kgs for all size balls Ball size Net Weight
20-30mm 930-1000KGS
40-60mm 900-930KGS
70-90mm 830-880KGS
100mm and above 830-850KGS
Bag:73×60cm, 1.5KG, 0.252CBMDrum:60×90cm, 15-20KG, 0.25CBMPallet Single:60×60×9cm, 4-6KG:Double:120×60×10cm, 12-14KG

Remark

1.JD SG4-4 series is a special supporting device for JD pressure sandblasting machine.
2. Adjust the degree of tightness of outer joint can in a way adjust the spinning speed of spinning nozzle holder. And the speed should be controlled within 30~500r/min.
3.If spinning nozzle holder stops spinning or spinning too slowly, it may be because of under pressure, too tight outer joint, stuck bearings or jamed nozzle. Stop the machine, and then adjust and check.
4.Before working,pipeline in wall sandblaster should be put in the in wall from one side to another, and dry pressed air must be inlet. When working, blasting pipe should be pulled out slowly to make it get out at a constant speed. If the cleaning quality can’t meet the requirements, work again to get the satisfactory effect.
5.If the abrasives are blocked and can not be sprayed out, it should be closed down first and exhaust, then have a check. 6). Quick-wear parts should be checked regularly,they should be replaced timely if worn, or they would have a bad influence on the efficiency and the blasting quality,and maybe Exhaust bring accidents

Technical parameters

Technical parameters of forging steel ball

Inch

Size

T weight

Tolerance(mm)

Material

Surface hardness(HRC)

Volume hardness(HRC)

3/4″

D20mm

0.037+/-0.005

2+/-1

B2

63-66

63-66

1″

D25mm

0.072+/-0.01

2+/-1

B2

63-66

63-66

11/4″

D30mm

0.13+/-0.02

2+/-1

B2

63-66

63-66

11/2″

D40mm

0.30+/-0.04

2+/-1

B2

62-66

62-66

2″

D50mm

0.6+/-0.05

2+/-1

B2

62-65

61-64

21/2″

D60mm

1.0+/-0.05

2+/-1.5

B2

62-65

60-62

21/2″

D65mm

1.3+/-0.05

2+/-1.5

B2

61-64

60-62

21/2″

D65mm

1.3+/-0.05

2+/-1.5

B3

61-63

60-62

3″

D75mm

2.0+/-0.06

3+/-2

B3

61-63

60-62

3″(Hot rolled)

D80mm

2.0+/-0.06

3+/-2

B3

60-63

60-62

3″(Forged)

D80mm

2.1+/-0.06

3+/-2

B3

60-62

53-57

31/2″

D90mm

3.0+/-0.07

3+/-2

B3

60-63

59-62

4″

D100mm

4.1+/-0.15

3+/-2

B3

60-63

59-62

4.5″

D115mm

6.3+/-0.15

3+/-2

B3

60-63

57-60

5″

D125mm

8.1+/-0.3

3+/-2

B3

59-62

55-60

Chemical composition

C%

Si%

Mn%

Cr%

P%

S%

Ni%

B2

0.72-1.03

0.15-0.35

0.3-1.2

0.2-0.6

≤0.035

≤0.035

i≤0.25

B3

0.53-0.88

1.2-2.00

0.50-1.20

0.7-1.20

≤0.035

≤0.035

i≤0.25

Forged Steel Ball-1
Forged Steel Ball-2
Forged Steel Ball-3
Forged Steel Ball-5
Forged Steel Ball-4
1
2
3
4
5
6
7


Product detail pictures:

Well-Designed 1 Inch Steel Ball - Grinding ball – Junda detail pictures

Well-Designed 1 Inch Steel Ball - Grinding ball – Junda detail pictures

Well-Designed 1 Inch Steel Ball - Grinding ball – Junda detail pictures

Well-Designed 1 Inch Steel Ball - Grinding ball – Junda detail pictures

Well-Designed 1 Inch Steel Ball - Grinding ball – Junda detail pictures

Well-Designed 1 Inch Steel Ball - Grinding ball – Junda detail pictures

Well-Designed 1 Inch Steel Ball - Grinding ball – Junda detail pictures

Well-Designed 1 Inch Steel Ball - Grinding ball – Junda detail pictures

Well-Designed 1 Inch Steel Ball - Grinding ball – Junda detail pictures


Related Product Guide:

Our commission would be to serve our customers and clientele with very best excellent and aggressive portable digital products for Well-Designed 1 Inch Steel Ball - Grinding ball – Junda , The product will supply to all over the world, such as: Benin, Nairobi, European, We have been in operation for more than 10 years. We are dedicated to quality products and consumer support. We currently own 27 product utility and design patents. We invite you to visit our company for a personalized tour and advanced business guidance.
  • We have been appreciated the Chinese manufacturing, this time also did not let us disappoint,good job!
    5 Stars By Alberta from Malta - 2017.10.27 12:12
    This company has the idea of better quality, lower processing costs, prices are more reasonable, so they have competitive product quality and price, that's the main reason we chose to cooperate.
    5 Stars By Elma from Zimbabwe - 2018.05.22 12:13
    Write your message here and send it to us
    page-banner