Products
-
The hardest blasting medium Silicon Carbide Grit
Silicon Carbide Grit
Due to its stable chemical properties, high thermal conductivity, low thermal expansion coefficient, and good wear resistance, silicon carbide has many other uses besides being used as abrasives. For example, silicon carbide powder is applied to the impeller or cylinder of a water turbine by a special process. The inner wall can improve its wear resistance and prolong its service life by 1 to 2 times; the high-grade refractory material made of it has heat shock resistance, small size, light weight, high strength and good energy-saving effect. Low-grade silicon carbide (containing about 85% of SiC) is an excellent deoxidizer.
-
High quality cast steel shot with high wear resistance
Junda Steel Shot is manufactured by melting selected scrap in electric induction furnace. The chemical composition of molten metal is analyzed and strictly controlled by spectrometer to obtain SAE Standard specification. The molten metal is atomized and transformed into round particle and subsequently quenched and tempered in a heat treating process to obtain a product of uniform hardness and microstructure, screened by size according to SAE Standard specification.
-
Glass beads with refractive indexes of 1.9 and 2.2
Junda glass bead is a type of abrasive blasting for surface finishing, specifically to prepare metals by smoothing them. Bead blasting provides superior surface cleaning to remove paint, rust and other coatings.
Sandblasting Glass Beads
Glass beads for marking road surfaces
Grinding Glass Beads
-
Bearing steel grit for stone cutting with long life
Bearing steel grit is made of chrome alloy material which is fast atomized after melting. After heat treatment, it is featured with optimum mechanical characteristics, good tenacity, high fatigue resistance, long working-life, low consumption and so on. 30% will be saved. Mainly used in granite cutting, sandblasting and shot peening.
Bearing steel grit is made of iron carbon alloy steel, used to make balls, rollers and bearing rings. Bearing steel has high and uniform hardness and high cycle times, as well as high elasticity. The uniformity of chemical composition, the content and distribution of non-metallic inclusions and the distribution of carbides of bearing steel are very strict, which is one of the high requirements in all steel production.
-
Stainless steel shot with atomization forming technology
Junda stainless steel shot has two types: atomized stainless steel shot and stainless steel wire cut shot. Atomized stainless steel shot is produced by German atomization technology and mainly used for sandblasting on the surface of aluminum profiles. The product has the advantages of bright and round particles, less dust, low loss rate and wide spray coverage. It can greatly reduce the production cost of aluminum profile enterprises.
Stainless steel wire cutting shot is refined by drawing, cutting, grinding and other processes. Appearance bright, rust – free, cylindrical (cut shot). Widely used in copper, aluminum, zinc, stainless steel and other workpiece surface spray treatment, for processed workpiece with matte effect, metal color, no rust and other advantages, without pickling rust removal. The wear resistance is 3- 5 times compared with cast steel shot and it can reduce production costs.
-
Excellent surface treatment White Aluminum Oxide Grit
Junda White aluminum oxide grit is a 99.5% ultra pure grade of blasting media. The purity of this media along with the variety of grit sizes available make it ideal for both traditional microdermabrasion processes as well as high-quality exfoliating creams.
Junda White aluminum oxide grit is an extremely sharp, long-lasting blasting abrasive that can be re-blasted many times. It is one of the most widely used abrasive in blast finishing and surface preparation because of its cost, longevity, and hardness. Harder than other commonly used blasting materials, white aluminum oxide grains penetrate and cut even the hardest metals and sintered carbide.
-
Sandblasting cabinet with customized according to customer requirements
Our blasting cabinet are produced by experienced engineers team of JUNDA. To pursue the best performance, the cabinet body is steel plate welded with powder coated surface, which is more durable, wear-resistant and lifelong than traditional painting, and the main components are famous brands imported overseas. We ensure 1 year warranty period for any quality problem.
Depending on size and pressure, there are many models
A dust removing system is used in the sandblasting machine, thoroughly collecting dust, creating a clear working view, ensuring that the recycled abrasive is pure and the air discharged to the atmosphere is dustfree.
Each blast cabinet includes durable aluminum alloy casting blast gun with 100% purity boron carbide nozzle. An air blowing gun to clean remaining dust and abrasive after blasting.
-
Durable hard fiber Walnut Shells Grit
Walnut shell grit is the hard fibrous product made from ground or crushed walnut shells. When used as a blasting media, walnut shell grit is extremely durable, angular and multi-faceted, yet is considered a ‘soft abrasive’. Walnut shell blasting grit is an excellent replacement for sand (free silica) to avoid inhalation health concerns.
-
High strength fatigue resistant Cut Wire Shot
Junda steel wire cutting shot are refined by drawing, cutting, strengthening and other processes, in strict accordance with German VDFI8001/1994 and American SAEJ441,AMS2431 standards. The particle size of the product is uniform, and the hardness of the product is HV400-500, HV500-555, HV555-605, HV610-670 and HV670-740. The particle size of the product ranges from 0.2mm to 2.0mm. The shape of the product is round shot cutting, roundness G1, G2, G3. Service life from 3500 to 9600 cycles.
Junda steel wire cutting shot particles uniform, there is no porosity inside the steel shot, with long life, shot blasting time and other advantages, practical in quenching gear, screws, springs, chains, all kinds of stamping parts, standard parts and stainless steel and other high hardness of the workpiece, can reach the surface to oxidize the skin, surface strengthening treatment, Finish, paint, corrosion, dust-free shot peening, solid workpiece surface highlights metal color, to achieve your satisfaction.
-
Steel grit with SAE standard specification
Junda Steel Grit is made by crushing steel shot to angular particle subsequently tempered to different hardness for different application, screened by size according to SAE Standard specification.
Junda Steel grit is a commonly used material for processing metal work pieces. Steel grit has tight structure and uniform particle size. Treating the surface of all metal work pieces with steel grit steel shot can increase the surface pressure of metal work pieces and improve the fatigue resistance of work pieces.
The use of steel grit steel shot processing metal work piece surface, with the characteristics of fast cleaning speed, has a good rebound, internal corner and complex shape of the work piece can be uniformly quick foam cleaning, shorten the surface treatment time, improve the work efficiency, is a good surface treatment material.
