Environmental protection sandblasting room is a kind of equipment to adapt to the needs of environmental protection. In the process of using its equipment, regular maintenance and maintenance are absolutely indispensable if you want to maintain the use and environmental performance of the equipment all the time.
1. Sand blasting pipeline and gas route
Check whether the sand blasting hose is damaged and replace it immediately. Check whether the connection is firm. If there is leakage, it should be removed immediately.
Check the gas pipe for damage, wear and connection to ensure that each joint is sealed reliably. If there is wear, replace it immediately.
2. Honeycomb floor
Every day at work and after work, check the honeycomb floor for large impurities, if so, should be removed.
3. Artificial breathing apparatus
Before commuting, check that the respirator’s protective glass is damaged or does not affect processing operations. If it is affected, replace it immediately. Ensure personal safety; Check the respirator air filter and air source to ensure normal air supply.
Because the glass of the protective suit is fragile, it should be handled gently during sandblasting operation, not touched carelessly, and should be put firmly when not in use.
4, spray gun, nozzle
Check the gun and nozzle for wear and replace it immediately if it is severely worn or if the efficiency of the sandblasting process is found to be significantly reduced.
Because the sprinkler head, protective suit glass, spray gun switch and other parts are fragile, the environmental protection sandblasting room should be gently held during sandblasting operation, do not shake and touch, and do not always need to be stable.
5. Sand discharge adjusting rod of sand regulating valve
Check whether the adjusting rod has been worn and must be replaced in advance.
6, the room protective rubber
Check whether the rubber in the room has been damaged and replaced according to the condition.
7. Door safety switch and gun switch
Check whether the gate control safety switch and spray gun switch are sensitive and effective. If the operation fails, it should be repaired immediately.
8. Sealing
Check seals, especially door seals, and replace them immediately if they are found to be ineffective.
9. Electrical control
Check the operation control button of each device is normal. If anything abnormal is found, fix it immediately.
10. Lights
Check the use of protective glass, ballast and bulb.
11, through the dust filter box gray box
Remove dust from filter element dust box and separator dust box before working.
According to the above detailed understanding of the maintenance and maintenance methods of environmental protection sandblasting room, in order to better use of equipment, reduce equipment failure, under the premise of ensuring the use efficiency of equipment, prolong the service life of equipment.
Post time: Mar-16-2023
