Main categories:
Sandblasting tanks are divided into water type and dry type sandblasting tanks.
The dry type can use metal and non-metallic abrasives, and the wet type can only use non-metallic abrasives, because metal abrasives is easy to rust, and the metal ones are too heavy to carry.
In addition, one aspect that the wet type is better than the dry type is that the wet type has no dust.
Construction details:
The sandblasting tank is powered by compressed air. Through the high-speed movement of the air in the spray gun, the abrasive is sucked into the spray gun and sprayed onto the processing surface.
So the main working part is the tank, which has various capacities, such as JD-400, JD-500 , JD-600, JD-700, JD-800, JD-1000, etc.,
JD-600 and below JD-600 have their own wheels, and above 600 do not have wheels, because they are too heavy, of course they can be customized to add wheels. The hose is divided into air hose and sand hose, and the nozzle is divided into 4/6/8/10 mm inner diameter. The valves are divided into simple valves and pneumatic valves. The pneumatic valve can be operated by one person, and the simple valve requires two people to operate the sandblasting tank.
What information do you need to consult If you are interested.
1. What is the capacity?
2. Dry or wet model?
3. Do you need wheels.
4. Do you just need a tank or a whole set? Such as hose,blasting nozzle, control valve (Simple valve or pneumatic valve?)
5.Do you have an air compressor and an air storage tank? This is an essential accessory for sandblasting pot work.
If you tell me the above information, you can get a complete quotation, thank you.
Post time: May-29-2023
