Welcome to our websites!

Massive Selection For 3mm Steel Balls - Grinding ball – Junda

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

We always think and practice corresponding to the change of circumstance, and grow up. We purpose at the achievement of a richer mind and body as well as the living for Hessonite Garnet Stone, Sandblasting Media, Sand Blast Cabinets, We're prepared to present you with the most effective ideas over the designs of the orders in a qualified way for those who need. While in the meantime, we continue to keep on producing new technologies and building new designs so as to help make you ahead from the line of this small business.
Massive Selection For 3mm Steel Balls - Grinding ball – Junda Detail:

Producing process

After checking and testing the round alloy steel bar material,the production can be started according to the size of the steel ball . The steel forging is heated to a certain temperature by intermediating with frequency furnace to ensure the effective generation of variables in the forging;  The red-hot steel forging is sent into the air hammer and processed by skilled operators.  After forging the red hot steel ball immediately into JUNDA specially designed heat treatment equipment for quenching and tempering heat treatment, the high and uniform hardness value of the steel ball can be ensured.

Feature

1.High impact toughness

2.Compact organization

3.High wear resistance

4.Low breakage rate

5.Uniform hardness

6.No deformation

Packing And Transportation

Container Bag

Steel Drum

Net weight 1000kgs for all size balls Ball size Net Weight
20-30mm 930-1000KGS
40-60mm 900-930KGS
70-90mm 830-880KGS
100mm and above 830-850KGS
Bag:73×60cm, 1.5KG, 0.252CBMDrum:60×90cm, 15-20KG, 0.25CBMPallet Single:60×60×9cm, 4-6KG:Double:120×60×10cm, 12-14KG

Remark

1.JD SG4-4 series is a special supporting device for JD pressure sandblasting machine.
2. Adjust the degree of tightness of outer joint can in a way adjust the spinning speed of spinning nozzle holder. And the speed should be controlled within 30~500r/min.
3.If spinning nozzle holder stops spinning or spinning too slowly, it may be because of under pressure, too tight outer joint, stuck bearings or jamed nozzle. Stop the machine, and then adjust and check.
4.Before working,pipeline in wall sandblaster should be put in the in wall from one side to another, and dry pressed air must be inlet. When working, blasting pipe should be pulled out slowly to make it get out at a constant speed. If the cleaning quality can’t meet the requirements, work again to get the satisfactory effect.
5.If the abrasives are blocked and can not be sprayed out, it should be closed down first and exhaust, then have a check. 6). Quick-wear parts should be checked regularly,they should be replaced timely if worn, or they would have a bad influence on the efficiency and the blasting quality,and maybe Exhaust bring accidents

Technical parameters

Technical parameters of forging steel ball

Inch

Size

T weight

Tolerance(mm)

Material

Surface hardness(HRC)

Volume hardness(HRC)

3/4″

D20mm

0.037+/-0.005

2+/-1

B2

63-66

63-66

1″

D25mm

0.072+/-0.01

2+/-1

B2

63-66

63-66

11/4″

D30mm

0.13+/-0.02

2+/-1

B2

63-66

63-66

11/2″

D40mm

0.30+/-0.04

2+/-1

B2

62-66

62-66

2″

D50mm

0.6+/-0.05

2+/-1

B2

62-65

61-64

21/2″

D60mm

1.0+/-0.05

2+/-1.5

B2

62-65

60-62

21/2″

D65mm

1.3+/-0.05

2+/-1.5

B2

61-64

60-62

21/2″

D65mm

1.3+/-0.05

2+/-1.5

B3

61-63

60-62

3″

D75mm

2.0+/-0.06

3+/-2

B3

61-63

60-62

3″(Hot rolled)

D80mm

2.0+/-0.06

3+/-2

B3

60-63

60-62

3″(Forged)

D80mm

2.1+/-0.06

3+/-2

B3

60-62

53-57

31/2″

D90mm

3.0+/-0.07

3+/-2

B3

60-63

59-62

4″

D100mm

4.1+/-0.15

3+/-2

B3

60-63

59-62

4.5″

D115mm

6.3+/-0.15

3+/-2

B3

60-63

57-60

5″

D125mm

8.1+/-0.3

3+/-2

B3

59-62

55-60

Chemical composition

C%

Si%

Mn%

Cr%

P%

S%

Ni%

B2

0.72-1.03

0.15-0.35

0.3-1.2

0.2-0.6

≤0.035

≤0.035

i≤0.25

B3

0.53-0.88

1.2-2.00

0.50-1.20

0.7-1.20

≤0.035

≤0.035

i≤0.25

Forged Steel Ball-1
Forged Steel Ball-2
Forged Steel Ball-3
Forged Steel Ball-5
Forged Steel Ball-4
1
2
3
4
5
6
7


Product detail pictures:

Massive Selection For 3mm Steel Balls - Grinding ball – Junda detail pictures

Massive Selection For 3mm Steel Balls - Grinding ball – Junda detail pictures

Massive Selection For 3mm Steel Balls - Grinding ball – Junda detail pictures

Massive Selection For 3mm Steel Balls - Grinding ball – Junda detail pictures

Massive Selection For 3mm Steel Balls - Grinding ball – Junda detail pictures

Massive Selection For 3mm Steel Balls - Grinding ball – Junda detail pictures

Massive Selection For 3mm Steel Balls - Grinding ball – Junda detail pictures

Massive Selection For 3mm Steel Balls - Grinding ball – Junda detail pictures

Massive Selection For 3mm Steel Balls - Grinding ball – Junda detail pictures


Related Product Guide:

Our commission is always to provide our customers and clientele with best quality and aggressive portable digital products for Massive Selection For 3mm Steel Balls - Grinding ball – Junda , The product will supply to all over the world, such as: Kuwait, Jamaica, New Zealand, So that you can utilize the resource from the expanding info in international trade, we welcome shoppers from everywhere on-line and offline. In spite of the good quality solutions we provide, effective and satisfying consultation service is supplied by our professional after-sale service team. Product lists and detailed parameters and any other info weil be sent to you timely for your inquiries. So you should make contact with us by sending us emails or call us if you have any questions about our corporation. ou may also get our address info from our web page and come to our company to get a field survey of our merchandise. We've been confident that we have been going to share mutual achievement and create strong co-operation relations with our companions in this marketplace. We're searching forward for your inquiries.
  • It is really lucky to meet such a good supplier, this is our most satisfied cooperation, I think we will work again!
    5 Stars By Ophelia from Czech Republic - 2017.03.28 12:22
    In China, we have purchased many times, this time is the most successful and most satisfactory, a sincere and realiable Chinese manufacturer!
    5 Stars By Hedy from Romania - 2018.02.04 14:13
    Write your message here and send it to us
    page-banner