Welcome to our websites!

Factory Wholesale 100mm Steel Ball - Grinding ball – Junda

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

All we do is usually affiliated with our tenet Buyer to start with, Belief to start with, devoting about the food packaging and environmental defense for Ruby Corundum Meaning, White Corundum F80, Sandblasting Guns, Trust us and you will gain more. Please feel free to contact us for more information, we assure you of our best attention at all times.
Factory Wholesale 100mm Steel Ball - Grinding ball – Junda Detail:

Producing process

After checking and testing the round alloy steel bar material,the production can be started according to the size of the steel ball . The steel forging is heated to a certain temperature by intermediating with frequency furnace to ensure the effective generation of variables in the forging;  The red-hot steel forging is sent into the air hammer and processed by skilled operators.  After forging the red hot steel ball immediately into JUNDA specially designed heat treatment equipment for quenching and tempering heat treatment, the high and uniform hardness value of the steel ball can be ensured.

Feature

1.High impact toughness

2.Compact organization

3.High wear resistance

4.Low breakage rate

5.Uniform hardness

6.No deformation

Packing And Transportation

Container Bag

Steel Drum

Net weight 1000kgs for all size balls Ball size Net Weight
20-30mm 930-1000KGS
40-60mm 900-930KGS
70-90mm 830-880KGS
100mm and above 830-850KGS
Bag:73×60cm, 1.5KG, 0.252CBMDrum:60×90cm, 15-20KG, 0.25CBMPallet Single:60×60×9cm, 4-6KG:Double:120×60×10cm, 12-14KG

Remark

1.JD SG4-4 series is a special supporting device for JD pressure sandblasting machine.
2. Adjust the degree of tightness of outer joint can in a way adjust the spinning speed of spinning nozzle holder. And the speed should be controlled within 30~500r/min.
3.If spinning nozzle holder stops spinning or spinning too slowly, it may be because of under pressure, too tight outer joint, stuck bearings or jamed nozzle. Stop the machine, and then adjust and check.
4.Before working,pipeline in wall sandblaster should be put in the in wall from one side to another, and dry pressed air must be inlet. When working, blasting pipe should be pulled out slowly to make it get out at a constant speed. If the cleaning quality can’t meet the requirements, work again to get the satisfactory effect.
5.If the abrasives are blocked and can not be sprayed out, it should be closed down first and exhaust, then have a check. 6). Quick-wear parts should be checked regularly,they should be replaced timely if worn, or they would have a bad influence on the efficiency and the blasting quality,and maybe Exhaust bring accidents

Technical parameters

Technical parameters of forging steel ball

Inch

Size

T weight

Tolerance(mm)

Material

Surface hardness(HRC)

Volume hardness(HRC)

3/4″

D20mm

0.037+/-0.005

2+/-1

B2

63-66

63-66

1″

D25mm

0.072+/-0.01

2+/-1

B2

63-66

63-66

11/4″

D30mm

0.13+/-0.02

2+/-1

B2

63-66

63-66

11/2″

D40mm

0.30+/-0.04

2+/-1

B2

62-66

62-66

2″

D50mm

0.6+/-0.05

2+/-1

B2

62-65

61-64

21/2″

D60mm

1.0+/-0.05

2+/-1.5

B2

62-65

60-62

21/2″

D65mm

1.3+/-0.05

2+/-1.5

B2

61-64

60-62

21/2″

D65mm

1.3+/-0.05

2+/-1.5

B3

61-63

60-62

3″

D75mm

2.0+/-0.06

3+/-2

B3

61-63

60-62

3″(Hot rolled)

D80mm

2.0+/-0.06

3+/-2

B3

60-63

60-62

3″(Forged)

D80mm

2.1+/-0.06

3+/-2

B3

60-62

53-57

31/2″

D90mm

3.0+/-0.07

3+/-2

B3

60-63

59-62

4″

D100mm

4.1+/-0.15

3+/-2

B3

60-63

59-62

4.5″

D115mm

6.3+/-0.15

3+/-2

B3

60-63

57-60

5″

D125mm

8.1+/-0.3

3+/-2

B3

59-62

55-60

Chemical composition

C%

Si%

Mn%

Cr%

P%

S%

Ni%

B2

0.72-1.03

0.15-0.35

0.3-1.2

0.2-0.6

≤0.035

≤0.035

i≤0.25

B3

0.53-0.88

1.2-2.00

0.50-1.20

0.7-1.20

≤0.035

≤0.035

i≤0.25

Forged Steel Ball-1
Forged Steel Ball-2
Forged Steel Ball-3
Forged Steel Ball-5
Forged Steel Ball-4
1
2
3
4
5
6
7


Product detail pictures:

Factory Wholesale 100mm Steel Ball - Grinding ball – Junda detail pictures

Factory Wholesale 100mm Steel Ball - Grinding ball – Junda detail pictures

Factory Wholesale 100mm Steel Ball - Grinding ball – Junda detail pictures

Factory Wholesale 100mm Steel Ball - Grinding ball – Junda detail pictures

Factory Wholesale 100mm Steel Ball - Grinding ball – Junda detail pictures

Factory Wholesale 100mm Steel Ball - Grinding ball – Junda detail pictures

Factory Wholesale 100mm Steel Ball - Grinding ball – Junda detail pictures

Factory Wholesale 100mm Steel Ball - Grinding ball – Junda detail pictures

Factory Wholesale 100mm Steel Ball - Grinding ball – Junda detail pictures


Related Product Guide:

With a complete scientific quality management system, good quality and good faith, we win good reputation and occupied this field for Factory Wholesale 100mm Steel Ball - Grinding ball – Junda , The product will supply to all over the world, such as: Mombasa, New Zealand, California, Why we can do these? Because: A, We are honest and reliable. Our items have high quality, attractive price, sufficient supply capacity and perfect service. B, Our geographical position has a big advantage . C, Various types: Welcome your inquiry, It might be highly appreciated.
  • The goods we received and the sample sales staff display to us have the same quality, it is really a creditable manufacturer.
    5 Stars By Olivia from Saudi Arabia - 2017.06.22 12:49
    Reasonable price, good attitude of consultation, finally we achieve a win-win situation,a happy cooperation!
    5 Stars By John biddlestone from Czech - 2017.05.21 12:31
    Write your message here and send it to us
    page-banner