Competitive Price for Rutile Sand - Koc approvl Garnet sand for Perfect Surface Treatment – Junda
Competitive Price for Rutile Sand - Koc approvl Garnet sand for Perfect Surface Treatment – Junda Detail:
Junda Advantages in Waterjet Cutting
Garnet comes in two basic forms, crushed and alluvial, the later being roughly similar to sand washed up on riversides. Our garnet for export is produced from our crystalline almandite garnet and river garnet sand. deposits. Thank to its sharp edges from crushing, this kind crushed garnet acts more like a sharp cutting tools so that it is superior to alluvial and have been shown to cut better and faster.
Sharper Edges
Due to our Junda garnet sandis crushed from almandine rock, it acts more like a sharp cutting tools and can cut faster and more efficiently than alluvial garnet.
Faster Cutting
Crushed and selected from hard rock so that Junda waterjet grade garnet produces harder and sharper edges than other waterjet abrasives. These characteristics enable our garnet more like a hard and sharp cutting tool to finish a faster cutting.
Better Edge quality
According to the cutting material and edge quality requirement, there are various special and proper waterjet grades recommended that enable a better edge quality.
Less Dusty
Junda garnet has high garnet purity and very low dust. That makes the whole cutting course more smoothly.
Sea Garnet
River Garnet
Rock Garnet Sand
Choosing the Proper Mesh or Grade
Junda offers various grades to match any focusing tube and orifice for any given cutting applications. Choosing the proper mesh, or grade, for the operation is very imperative. Different mesh sizes of garnet are designed to pass through different sized nozzles and choosing the wrong grade could be stop a waterjet operation completely. If the garnet grade is too large or coarse, the granules can jam inside a tube and cause a blockage. Too fine an abrasive have a tendency to “clump” together inside the cutting head and again, have the potential to clog. Or it may inhibit the flow of garnet in the feed tube and not consistently enter the venture of water flow between the jewel and nozzle. If you are not sure which mesh or grade is proper, feel free to contact us and we would like to give you our professional suggestions.
| Coarse | 60 Mesh |
| Medium | 80 Mesh |
| Fine | 120 Mesh |
| More fine grades | 150 mesh, 180 mesh, 200 mesh, 220 mesh |
Average Chemical Composition (Typical)
| Al2O3 | 18.06% |
| Fe2 O3 | 29.5% |
| Si O2 | 37.77% |
| MgO | 4.75% |
| CaO | 9% |
| Ti O2 | 1.0% |
| P2 O5 | 0.05% |
| Mn O | 0.5% |
| Zr O2 | Traces |
| CHLORIDE CONTENT | Less than 25ppm |
| SOLUBLE SALTS | Less than 100 ppm |
| PH OF AQUEOUS MEDIUM | 6.93 |
| GYPSUM CONTENT | Nil |
| MOISTURE CONTENT | Less than 0.5% |
| CARBONATE CONTENT | Traces |
| LOSS ON IGNITION | Nil |
| METAL CONTENT | Traces |
Other Characteristics
| Crystal System | Cubic |
| Habit | Trapezohedron |
| Fracture | Sub-Conchoidal |
| Durability | Very good |
| Free Flow | 90% Minimum |
| Susceptibility to Acid | None |
| Moisture Absorption | Non Hygroscopic, Inert. |
| Magnetism | Very Slightly Magnetic |
| Conductivity | Less than 25 Microsiemens per Meter |
| Radio Activity | Not Detectable above background |
| Pathological Effects | None |
| Free Silica Content | None |
Mineralogical Composition
|
Garnet (Almandite) |
97-98% |
|
Ilmenite |
1-2% |
|
Quartz |
<0.5% |
|
Others |
0.5% |
Physical Characteristics
| Specific Weight | 4.1 g/cm3 |
| Average Bulk | 2.4 g/cm3 |
| Hardness | 7 (Mohs Scale) |
| Mesh | Size MM | 16/30 MESH | 20/40 MESH | 20/60 MESH | 30/60 MESH | 40/60 MESH | 80 MESH |
| 14 | 1.40 | ||||||
| 16 | 1.18 | 0-5 | 0-1 | ||||
| 18 | 1.00 | 10-20 | |||||
| 20 | 0.85 | 20-35 | 0-5 | 0-5 | 0-1 | ||
| 30 | 0.60 | 20-35 | 30-60 | 10-25 | 0-10 | 0-5 | |
| 40 | 0.43 | 0-12 | 35-60 | 25-50 | 10-45 | 40-65 | 0-5 |
| 50 | 0.30 | 0-18 | 25-45 | 40-70 | 30-50 | 0-50 | |
| 60 | 0.25 | 0-5 | 0-15 | 5-20 | 10-20 | 15-50 | |
| 70 | 0.21 | 0-10 | 0-7 | 10-55 | |||
| 80 | 0.18 | 0-5 | 0-5 | 5-40 | |||
| 90 | 0.16 | 0-15 |
Application
Sandblasting
Garnet sand abrasive has features of good hardness, high bulk density, heavy specific weight, good toughness and no free silica. It is widely used in aluminum profile, copper profile, precision molds, and many other fields. And it is used for sandblasting, rust removing and surface treatment in stainless steel, carbon steel, steel structure, aluminum, titanium, galvanized parts, glass, stone, wood, rubber, bridge, shipbuilding, ship repair, etc.
Water Filtration
Thanks to it heavy specific weight and stable chemical properties. Our garnet sand 20/40# can be used as the bottom media of filter bed in water filtration of chemical industry, petroleum, pharmacy, cleaning drinking water or waste. It is one of the most cost effective alternatives for water filtration beds to replace silica sand and gravel in water filtration, Especially it can be applied in beneficiation of non-ferrous metals and oil drilling mud weighting agent, because it resets the filter bed more rapidly after the filter bed is back-flushed.
Water Jet Cutting
Our garnet sand 80# has features of sub conchoidal fracture, high hardness, good toughness and sharp edges.It can form new angular edges constantly during crushing and classifying. Water jet cutting uses garnet sand as the cutting medium, relies on high-pressure water jets to water jet cut oil and gas pipelines, steel and other components, stainless steel, copper, metal, marble, stone, rubber, glass, ceramics. Also for its high speed and fluency in water jet cutting, it will not jam the cutting tool bit used on water jet cutting machine.
Customer
Certificate
Product detail pictures:
Related Product Guide:
We are also specializing in improving the things management and QC method in order that we could retain terrific edge inside the fiercely-competitive small business for Competitive Price for Rutile Sand - Koc approvl Garnet sand for Perfect Surface Treatment – Junda , The product will supply to all over the world, such as: Indonesia, Costa rica, St. Petersburg, we have complete material production line, assembling line , quality control system, and the most importantly, we have many patents technology and experienced technical&production team, professional sales service team. With all those advantages, we are going to createthe reputable international brand of nylon monofilaments, and spreading our products to every corner of the world. We are keep moving and try our best to serve our customers.
By tobin from Italy - 2018.12.30 10:21
As an international trading company, we have numerous partners, but about your company, I just want to say, you are really good, wide range, good quality, reasonable prices, warm and thoughtful service, advanced technology and equipment and workers have professional training, feedback and product update is timely, in short, this is a very pleasant cooperation, and we look forward to the next cooperation!
By David Eagleson from Provence - 2017.05.02 18:28
Products categories
