Welcome to our websites!

China Factory For 6mm Stainless Steel Balls - Grinding ball – Junda

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

With our leading technology also as our spirit of innovation,mutual cooperation, benefits and advancement, we'll build a prosperous future together with your esteemed organization for Corn Cob Grit, Pipe inside sandblasting gun, Cut Stainless Steel Wire, Any requires from you will be paid with our best attention!
China Factory For 6mm Stainless Steel Balls - Grinding ball – Junda Detail:

Producing process

After checking and testing the round alloy steel bar material,the production can be started according to the size of the steel ball . The steel forging is heated to a certain temperature by intermediating with frequency furnace to ensure the effective generation of variables in the forging;  The red-hot steel forging is sent into the air hammer and processed by skilled operators.  After forging the red hot steel ball immediately into JUNDA specially designed heat treatment equipment for quenching and tempering heat treatment, the high and uniform hardness value of the steel ball can be ensured.

Feature

1.High impact toughness

2.Compact organization

3.High wear resistance

4.Low breakage rate

5.Uniform hardness

6.No deformation

Packing And Transportation

Container Bag

Steel Drum

Net weight 1000kgs for all size balls Ball size Net Weight
20-30mm 930-1000KGS
40-60mm 900-930KGS
70-90mm 830-880KGS
100mm and above 830-850KGS
Bag:73×60cm, 1.5KG, 0.252CBMDrum:60×90cm, 15-20KG, 0.25CBMPallet Single:60×60×9cm, 4-6KG:Double:120×60×10cm, 12-14KG

Remark

1.JD SG4-4 series is a special supporting device for JD pressure sandblasting machine.
2. Adjust the degree of tightness of outer joint can in a way adjust the spinning speed of spinning nozzle holder. And the speed should be controlled within 30~500r/min.
3.If spinning nozzle holder stops spinning or spinning too slowly, it may be because of under pressure, too tight outer joint, stuck bearings or jamed nozzle. Stop the machine, and then adjust and check.
4.Before working,pipeline in wall sandblaster should be put in the in wall from one side to another, and dry pressed air must be inlet. When working, blasting pipe should be pulled out slowly to make it get out at a constant speed. If the cleaning quality can’t meet the requirements, work again to get the satisfactory effect.
5.If the abrasives are blocked and can not be sprayed out, it should be closed down first and exhaust, then have a check. 6). Quick-wear parts should be checked regularly,they should be replaced timely if worn, or they would have a bad influence on the efficiency and the blasting quality,and maybe Exhaust bring accidents

Technical parameters

Technical parameters of forging steel ball

Inch

Size

T weight

Tolerance(mm)

Material

Surface hardness(HRC)

Volume hardness(HRC)

3/4″

D20mm

0.037+/-0.005

2+/-1

B2

63-66

63-66

1″

D25mm

0.072+/-0.01

2+/-1

B2

63-66

63-66

11/4″

D30mm

0.13+/-0.02

2+/-1

B2

63-66

63-66

11/2″

D40mm

0.30+/-0.04

2+/-1

B2

62-66

62-66

2″

D50mm

0.6+/-0.05

2+/-1

B2

62-65

61-64

21/2″

D60mm

1.0+/-0.05

2+/-1.5

B2

62-65

60-62

21/2″

D65mm

1.3+/-0.05

2+/-1.5

B2

61-64

60-62

21/2″

D65mm

1.3+/-0.05

2+/-1.5

B3

61-63

60-62

3″

D75mm

2.0+/-0.06

3+/-2

B3

61-63

60-62

3″(Hot rolled)

D80mm

2.0+/-0.06

3+/-2

B3

60-63

60-62

3″(Forged)

D80mm

2.1+/-0.06

3+/-2

B3

60-62

53-57

31/2″

D90mm

3.0+/-0.07

3+/-2

B3

60-63

59-62

4″

D100mm

4.1+/-0.15

3+/-2

B3

60-63

59-62

4.5″

D115mm

6.3+/-0.15

3+/-2

B3

60-63

57-60

5″

D125mm

8.1+/-0.3

3+/-2

B3

59-62

55-60

Chemical composition

C%

Si%

Mn%

Cr%

P%

S%

Ni%

B2

0.72-1.03

0.15-0.35

0.3-1.2

0.2-0.6

≤0.035

≤0.035

i≤0.25

B3

0.53-0.88

1.2-2.00

0.50-1.20

0.7-1.20

≤0.035

≤0.035

i≤0.25

Forged Steel Ball-1
Forged Steel Ball-2
Forged Steel Ball-3
Forged Steel Ball-5
Forged Steel Ball-4
1
2
3
4
5
6
7


Product detail pictures:

China Factory For 6mm Stainless Steel Balls - Grinding ball – Junda detail pictures

China Factory For 6mm Stainless Steel Balls - Grinding ball – Junda detail pictures

China Factory For 6mm Stainless Steel Balls - Grinding ball – Junda detail pictures

China Factory For 6mm Stainless Steel Balls - Grinding ball – Junda detail pictures

China Factory For 6mm Stainless Steel Balls - Grinding ball – Junda detail pictures

China Factory For 6mm Stainless Steel Balls - Grinding ball – Junda detail pictures

China Factory For 6mm Stainless Steel Balls - Grinding ball – Junda detail pictures

China Factory For 6mm Stainless Steel Balls - Grinding ball – Junda detail pictures

China Factory For 6mm Stainless Steel Balls - Grinding ball – Junda detail pictures


Related Product Guide:

So that you can finest fulfill client's demands, all of our operations are strictly performed in line with our motto High Excellent, Competitive Price, Fast Service for China Factory For 6mm Stainless Steel Balls - Grinding ball – Junda , The product will supply to all over the world, such as: Peru, Tajikistan, Johannesburg, We have the best products and professional sales and technical team.With the development of our company, we are able to provide customers best products, good technical support, perfect after-sales service.
  • This is a very professional and honest Chinese supplier, from now on we fell in love with the Chinese manufacturing.
    5 Stars By Ella from Holland - 2018.09.12 17:18
    On this website, product categories is clear and rich, I can find the product I want very quickly and easily, this is really very good!
    5 Stars By Elvira from Argentina - 2017.09.09 10:18
    Write your message here and send it to us
    page-banner